UKK 5-2DIO/O-UL/UR-UL

https://www.phoenixcontact.com/us/products/2791113 Component terminal block - UKK 5-2DIO/O-UL/UR-UL - 2791113 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Component terminal block, with integrated diode, Cross section:  0.2 mm² - 4 mm², AWG: 24 - 12, Connection type: Screw connection, Width: 6.2 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15, NS 32 Product Features ■ Double-level diode terminal blocks with various forms of wiring are available for a wide range of applications Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 16.2 g Custom tariff number 85369010 Country of origin Poland Technical data General Note The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A. Number of levels 2 Number of connections 4 Nominal cross section 4 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III 03/14/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2791113 Component terminal block - UKK 5-2DIO/O-UL/UR-UL - 2791113 Technical data General Insulating material group I Connection in acc. with standard IEC / EN Nominal current IN 32 A Maximum load current 32 A (For 4 mm² conductor cross section, se derating curve) Nominal voltage UN 500 V (Data is based on the dielectric strength of adjacent terminal blocks or of the DINg rail.) Open side panel Yes Dimensions Width 6.2 mm Length 56 mm Height NS 35/7,5 62 mm Height NS 35/15 69.5 mm Height NS 32 67 mm Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 4 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Connection method Screw connection Stripping length 8 mm 03/14/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2791113 Component terminal block - UKK 5-2DIO/O-UL/UR-UL - 2791113 Technical data Connection data Internal cylindrical gage A4 Screw thread M3 Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Standards and Regulations Connection in acc. with standard CUL IEC / EN Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141127 eCl@ss 4.1 27141127 eCl@ss 5.0 27141127 eCl@ss 5.1 27141127 eCl@ss 6.0 27141127 eCl@ss 7.0 27141127 eCl@ss 8.0 27141127 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000903 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 03/14/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2791113 Component terminal block - UKK 5-2DIO/O-UL/UR-UL - 2791113 Approvals Approvals UL Recognized / cUL Recognized / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 26-10 26-10 Nominal current IN 30 A 30 A Nominal voltage UN 600 V 600 V cUL Recognized  EAC  EAC  cULus Recognized  Drawings 03/14/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2791113 Component terminal block - UKK 5-2DIO/O-UL/UR-UL - 2791113 Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/14/2016   Page 5 / 5